Moneual Sonamu G100: Back to the Future
by Dustin Sklavos on June 7, 2011 12:01 AM EST- Posted in
- Cases/Cooling/PSUs
- mid-tower
- Moneual
Testing Methodology
For testing Micro-ATX and Mini-ITX cases, we use the following standardized testbed in its stock configuration and a Zotac GeForce GTX 580 in cases that support it to get a feel for how the case handles heat and noise. Due to the Moneual Sonamu G100's eight inches of expansion card clearance, we were unable to provide additional results using the GTX 580.
| Mini-ITX/Micro-ATX Test Configuration | |
| CPU | Intel Core i3-530 (73W TDP) |
| Motherboard | Zotac H55ITX-WiFi |
| Graphics Card | Intel HD Graphics (IGP) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Samsung 5.25" BD-ROM/DVDRW Drive Kingston SSDNow V+ 100 64GB SSD Western Digital Caviar Black 1TB SATA 6Gbps |
| CPU Cooler | Zalman CNPS8000A with Cooler Master ThermalFusion 400 |
| Power Supply | Included Logisys 350W PSU |
A refresher on how we test:
Acoustic testing is standardized on a foot from the front of the case, using the Extech SL10 with an ambient noise floor of ~32dB. For reference, that's what my silent apartment measures with nothing running, testing acoustics in the dead of night (usually between 1am and 3am). A lot of us sit about a foot away from our computers, so this should be a fairly accurate representation of the kind of noise the case generates, and it's close enough to get noise levels that should register above ambient.
Thermal testing is run with the computer having idled at the desktop for fifteen minutes, and again with the computer running both Furmark (where applicable) and Prime95 (less one thread when a GPU is being used) for fifteen minutes. I've found that leaving one thread open in Prime95 allows the processor to heat up enough while making sure Furmark isn't CPU-limited. We're using the thermal diodes included with the hardware to keep everything standardized, and ambient testing temperature is always between 71F and 74F. Processor temperatures reported are the average of the CPU cores.
For more details on how we arrived at this testbed, you can check out our introductory passage in the review for the SilverStone FT03.
Last but not least, we'd also like to thank the vendors who made our testbed possible:
Thank You!
We have some thanks in order before we press on:
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory we used to add memory thermals to our testing.
- Thank you to Zalman for providing us with the CNPS8000A heatsink and fan unit we used.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Western Digital Caviar Black hard drive and the optical drive.
Facebook
Twitter
RSS
19 Comments
View All Comments
tomoyo - Tuesday, June 7, 2011 - link
Wow this case sounds like one of the worst ripoffs in a while. At least crap cases like Raidmax with low end power supplies are actually priced properly. I feel like any 3 year old antec case is far more worthwhile then this, at least they mostly all come with decent psus, versus a psu you would only give your worst enemy. Definitely not a company I'll be recommending.Operandi - Tuesday, June 7, 2011 - link
Looks like your typical lump of plastic and steel to me, I see no out standing features to justify the ridiculous price tag. I for one don't find overprices low-end cases very exciting.Lian Li is making some pretty interesting iTX cases, review one of those.
Dustin Sklavos - Tuesday, June 7, 2011 - link
If everything we reviewed was a winner, how would you know what was bad? :)ppeterka - Tuesday, June 7, 2011 - link
Thank you for occasionally reviewing bad products! I think the answer to the "what's bad" question is more important than the question to the "what's good", given I want to shell out money for something I'd like to use every day.And I like the style too. Reminded me of Top Gear's Jeremy Clarkson reviewing FSO Polonez. http://www.youtube.com/watch?v=x5gETRjT470
Operandi - Tuesday, June 7, 2011 - link
Really?Just browse Newegg and look around, 95% of it looks just like this piece of crap and is just as bad, are you going to review all the POS cases out there?
Review the stand out products, high quality, innovative, or at least interesting in some way. Ignore the mediocrity and shitty, nobody cares.
Dustin Sklavos - Wednesday, June 8, 2011 - link
Sometimes it's difficult to really know how bad something is until we have it in-house. Moneual offered this unit for review, why would we assume it wasn't at least halfway decent?As it turned out, it wasn't remotely decent. I honestly feel like we're doing the readership a solid by pointing out what a bad deal this case is.
A reputable site publishes the good and the bad, that's how you know they're not in someone's pocket. If everything we published was golden, we'd be the hardware version of GameSpot.
Operandi - Wednesday, June 8, 2011 - link
Negative reviews are indeed essential and valuable to the readership but I don't see the point in reviewing out right junk. Perhaps there is something there that caught your interest before reviewing it but I can't imagine what it was, I saw the picture on the front page and thought "that looks like a piece of crap", the review pretty much confirmed it.I guess my main point is there isn't any purpose in reviewing mediocrity. Every product has design goals, and on a case like this the goal was obviously set pretty low. Even if it had not utterly failed, it would still not be an interesting product or review.
Impulses - Tuesday, June 7, 2011 - link
Plugging all your non-essential peripherals into a surge protector and turning it off does a far better job of being green, total cost: about $10 for the surge protector. Doesn't everyone do that these days? You would think all the TV commercials urging people to unplug their chargers and whatnot would be taking us in that direction, I guess Moneual's just trying to make a quick buck off the green trend tho.GeorgeH - Tuesday, June 7, 2011 - link
I was actually thinking that this was a perfectly serviceable, if ugly, PC case for those on a very tight budget, thinking that $140 was a typo and you meant $40. I was getting ready to thank you for taking the time to review a "cheap" case - then I finished reading the second page.W-T-F. You're being far too generous throwing this case in the $50-70 range; it's only worth more than $45 if you're blind and like the way it looks. $140 is so ridiculous it's almost funny.
L. - Tuesday, June 7, 2011 - link
Well .. You're still being generous.This is a 100% "made and designed in china" piece of crap, the likes of which cost 40 bucks WITH a 450watt (lolwatts, not real watts) PSU and an integrated LCD + fan control.
Considering this one has an even worse PSU than the one I'm thinking about, and also lacks the LCD / fan control.. I believe you can at best consider it's worth 30 bucks.. and still -- for 30 bucks you can get a very decent chinese box that has a lateral 220mm fan and no PSU - as you'll have to change it anyway who'd want to pay for that.
By the way, if you're interested in reviewing cheap, you might wanna take a look at real contenders, because there's quite a few unkown brands that produce stuff much better than Tt / CM / Si / Antec -- Just a bit hard to find sometimes.