Corsair Carbide 200R Case Review: How Low Can You Go
by Dustin Sklavos on December 15, 2012 12:01 AM EST- Posted in
- Cases/Cooling/PSUs
- Corsair
- mid-tower
Testing Methodology
For testing Micro-ATX and full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
| ATX Test Configuration | |
| CPU |
Intel Core i7-2700K (95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V) |
| Motherboard | Gigabyte GA-Z68MX-UD2H-B3 |
| Graphics Card |
ASUS GeForce GTX 560 Ti DCII TOP (tested at stock speed and overclocked to 1GHz/overvolted to 1.13V) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
| Accessories | Corsair Link |
| CPU Cooler | Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone Strider Plus 750W 80 Plus Silver |
Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i7-2700K.
- Thank you to Gigabyte for providing us with the GA-Z68MX-UD2H-B3 motherboard.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Corsair for providing us with the Corsair Link kit.
- Thank you to Cooler Master for providing us with the Hyper 212 Evo heatsink and fan unit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply.
Facebook
Twitter
RSS
25 Comments
View All Comments
Grok42 - Saturday, December 15, 2012 - link
I like to see good clean looking case designs like this at a low price point. Given the price I would expect some compromises and honestly it could have been a lot worse. I think the industry needs more experimentation with how internal drives are mounted so I applaud any effort even failures. Hopefully they will come back with something better next time around. Maybe next time they will save some money by killing the external bays and putting the resources into the internal bays.versesuvius - Saturday, December 15, 2012 - link
The only time one needs a tool for a case is the hard drive and other storage parts. The problem is not that people do not know how to use a screw driver, but that it has screws on the two sides of the case. As it is right now, you have to go through more trouble with the toolless case than you have with traditional ones. The answer lies not with the case manufacturers, but with internal storage manufacturers. It is very ease to design a hard disk casing so that it needs screws only on one side, and not two. Yet after maybe 30 years of hard disks, the casing has not changed a bit. Even the SSD casing design has adopted the same philosophy. As far as backward compatibility goes, the casing can be designed to accommodate old cases as well. Anyway, I agree with the article about the drive cage. It is a stupid decision in all cases to begin with and it is stupid here too. After all, how many drives one changes during the lifetime of a PC? Two? As long as the case has to be opened that amounts to 10 during the lifetime of a case, while the extra accumulated heat is there all the time.arthur449 - Saturday, December 15, 2012 - link
"How many drives one changes during the lifetime of a PC?"I have a Coolermaster ATCS-200 case I bought in 2000 still kicking around the house. While it only has 80mm fans, it remains a very attractive and functional case for 'that random frankenputer' one generally has after a few years of building their own PCs.
How many times have I changed the drives in that case? More times than I can remember. Some of them due to drive failures, some due to SSD / SAS experimentation, and many times for just cramming old drives in there and doing some bare metal testing of the latest silly OS that trickles down the MS TechNet vine.
A good case will survive multiple generations of hardware, and (since its target audience is already building their own computers) will more than likely put up with many drive swaps as it's handed down to friends, relatives, or simply demoted to closet server duty.
Lonyo - Saturday, December 15, 2012 - link
I still have my ACTS 200 or 201, and the next gen replacement case for it, but neither are in proper use.The motherboard tray from one is in use for a makeshift computer elsewhere where I can't use the full case.
The drive cages in both are hideous though, compared to modern cases. We have come a long way from the old days.
piroroadkill - Saturday, December 15, 2012 - link
I won't buy a case with an open top.Too much chance something will spill in it, or dust will settle on my gear.
Copy Lian-Li and Fractal Design - give us a simple option to use the holes or not.
Blibbax - Saturday, December 15, 2012 - link
That'd add cost. It could sold as an accessory though - I too avoid open top or even open side cases.Tech-Curious - Saturday, December 15, 2012 - link
Toss some sound dampening material over the fan mounts you don't intend to use; it works like a charm. The only problem, in my experience, is that the adhesive on sound dampening material is so strong that your decision is basically permanent.It's funny, I bought a box of sound dampening material, just for kicks, like seven years ago and I never used it as it was (presumably) intended to be used -- but I've used bits and pieces to great effect. And I still have some left.
Cut out four tiny little strips of the stuff and place it on the borders of your fan mounts, and vibration basically disappears. That silly-sounding trick single-handedly resurrected two positively ancient (circa 2002) jet-engine-sounding cases (6+ 80mm fan mounts each) that were sitting in my basement, collecting dust.
Tech-Curious - Saturday, December 15, 2012 - link
That said, I agree that the proliferation of computer cases featuring fan mounts in every available space is somewhat annoying -- especially given that those cases typically only come with 2 fans out of the box.Likewise, I'd love to see more cases with the old fashioned top-mounted PSU design. I understand the benefits of the alternative, but even with a filter, a bottom-mounted PSU is less than ideal on my carpeted floor.
Blibbax - Saturday, December 15, 2012 - link
Agreed on all accounts.TekDemon - Sunday, December 30, 2012 - link
I think it's actually great since it's the cheapest case that appears to support the H100 cooler, which was the main reason I bought my Carbide 400R (which I love-it's an awesome case). I wouldn't have been able to use this case though since I have a super long pci-e card.