OCZ Demonstrates Native PCIe SSDs: Z-Drive R5 in PCIe, mini-PCIe and 2.5" Form Factors
by Anand Lal Shimpi on June 5, 2012 2:06 AM EST- Posted in
- Trade Shows
- Storage
- SSDs
- Marvell
- OCZ
- Z-Drive R5
- Computex 2012
OCZ showed us its Kilimanjaro based Z-Drive R5 (native PCIe controller jointly developed with Marvell) running a 4KB random write test at Computex today. The drive was pushing as much as 800K 4KB random write IOPS, although by the time we got to the demo the drive had been dirtied to the point that it was delivering around 570K IOPS and over 2GB/s.
The R5 features sixteen PCIe 2.0 x1 Kilimanjaro controllers behind a PCIe 3.0 x8 switch, enabling tons of bandwidth.
OCZ also had physical samples of its 2.5" PCIe and mini-PCIe Kilimanjaro platforms. Remember Kilimanjaro is a native PCIe SSD controller so there's no SATA to be found on the board. The 2.5" PCIe device uses a standard SSD form factor but with a PCIe connector. There are two controllers behind a PCIe switch on the 2.5" drive, while the mini-PCIe drive features a single controller.
14 Comments
View All Comments
FaaR - Tuesday, June 5, 2012 - link
It says right in the article this is a NATIVE PCIe solution, if you just bother to read it properly. :) It doesn't use SATA/SAS.ctyau - Thursday, June 7, 2012 - link
Ok...so is it NVMe or a proprietary PCIe implementation?etamin - Tuesday, June 5, 2012 - link
Any long term reliability tests done on the Vertex 4? I don't think I've read about any BSOD problems. The only complaints on Newegg are on firmware upgrade inconveniences.josephjpeters - Tuesday, June 5, 2012 - link
I've had a 128GB Vertex 4 for about 2 months now (since launch) and it's been rock solid. The access times definitely make a difference compared to the Sandforce drives. The new FW made a big difference too.