Crucial M550 Review: 128GB, 256GB, 512GB and 1TB Models Tested
by Kristian Vättö on March 18, 2014 8:00 AM ESTThis is shaping up to be the busiest month in the SSD frontier for ages. Intel released its new flagship SSD 730 series just a couple of weeks ago and there are at least two more releases coming in the next few weeks...but today it's Crucial's turn to up the ante.
Unlike many OEMs, Crucial has more or less had only one active series in its SSD portfolio at a time. A few years ago this approach made sense because the SSD market as a whole mainly focused on enthusiasts and there was no real benefit to a tiered lineup. As the market has matured and prices have dropped over time, we are now in a situation similar to other components: there is the high volume mainstream market where price is the key and the higher margin enthusiast/professional market where performance and features matter. Covering both of these markets with a single product is hard because in order to compete in price, it's usually necessary to use lower quality parts, which in turn affects performance and features.
With the M500 Crucial was mainly targeting the mainstream market. The performance was mostly better than in the m4 days but only mediocre compared to other SSDs in the market. The introduction of the likes of the SanDisk Extreme II, Seagate SSD 600, and OCZ Vector 150 has upped the ante even more in the enthusiast segment and it has become clear that the M500 has no place there. To stay competitive in all product areas, Crucial is now launching the big brother to their M500: the M550.
EDIT: Just to clarify, the M500 will continue to be available and the M550 is merely a higher performing option at slightly higher price.
With 64Gbit NAND, 240/256GB was usually the sweet spot in terms of price and performance. That combination offered enough NAND die to saturate the SATA 6Gbps as well as the controller's/firmware's potential, but with the M500 this was no longer the case thanks to the usage of 128Gbit NAND. With a die that was twice the capacity, you only needed half the dies to build a 240/256GB SSD. As NAND parallelism is a major source of SSD performance, this meant a decrease in performance at 240/256GB and you would now have to go to 480/512GB to get the same level of performance that 240/256GB offered with 64Gbit NAND.
The use of 128Gbit NAND was one of the main reasons for the M500's poor performance, and with others staying with 64Gbit NAND, that backfired on Crucial in terms of performance (more on this later). Since it's not possible to magically decrease program times or add parallelism, Crucial decided to bring back the 64Gbit NAND in the lower capacity M550s. Here's how the new and old models compare:
Crucial M550 vs Crucial M500 | ||||||||
M550 | M500 | |||||||
Controller | Marvell 88SS9189 | Marvell 88SS9187 | ||||||
NAND | Micron 64/128Gbit 20nm MLC | Micron 128Gbit 20nm MLC | ||||||
Capacity | 128GB | 256GB | 512GB | 1TB | 120GB | 240GB | 480GB | 960GB |
Sequential Read | 550MB/s | 500MB/s | ||||||
Sequential Write | 350MB/s | 500MB/s | 130MB/s | 250MB/s | 400MB/s | |||
4KB Random Read | 90K IOPS | 95K IOPS | 62K IOPS | 72K IOPS | 80K IOPS | |||
4KB Random Write | 75K IOPS | 80K IOPS | 85K IOPS | 35K IOPS | 60K IOPS | 80K IOPS | ||
Endurance | 72TB (~66GB/day) | 72TB (~66GB/day) | ||||||
Warranty | Three years | Three years |
The 128GB and 256GB models are now equipped with 64Gbit per die NAND while 512GB and 1TB models use the same 128Gbit NAND as in the M500. What this means is that the 128GB and 256GB models are much more competitive in performance because the die count is twice that of the same capacity M500 drives. You get roughly the same performance with both 256GB and 512GB models (unlike the nearly 50% drop in write performance like in the M500) and the 128GB actually beats the 240GB M500 in all metrics. There is obviously some firmware tweaking involved as well and the bigger capacities get a performance bump too, although it's much more moderate compared to the smaller capacities.
Another difference is the controller. Compared to the NAND, this isn't as substantial a change because the Marvell 9189 is more of an updated version of the 9187 and the only major upgrades are support for LPDDR and better optimization for DevSleep, both of which help with power consumption and can hence extend the battery life.
Crucial M550 Specifications | ||||
Capacity | 128GB | 256GB | 512GB | 1TB |
Controller | Marvell 88SS9189 | |||
NAND | Micron 64Gb 20nm MLC | Micron 128Gb 20nm MLC | ||
Cache (LPDDR2-1066) | 512MB | 512MB | 512MB | 1GB |
Sequential Read | 550MB/s | 550MB/s | 550MB/s | 550MB/s |
Sequential Write | 350MB/s | 500MB/s | 500MB/s | 500MB/s |
4KB Random Read | 90K IOPS | 90K IOPS | 95K IOPS | 95K IOPS |
4KB Random Write | 75K IOPS | 80K IOPS | 85K IOPS | 85K IOPS |
Similar to the earlier drives, Crucial continues to be Micron's household brand whereas OEM drives will be sold under Micron's name. It's just a matter of branding and there are no differences between the retail and OEM drives other than an additional 64GB model for OEMs.
Crucial switches back to binary capacities in the M550 and with the 1TB model you actually get the full 1024GB of space (though Crucial lists it as 1TB for marketing reasons, and there's still 1024GiB of actual NAND). The reason behind this isn't a reduction in over-provisioning but merely a more optimized use of RAIN (Redundant Array of Independent NAND).
RAIN is similar to SandForce's RAISE and the idea is that you take some NAND space and dedicate that to parity. Almost every manufacturer is doing this at some level nowadays since the NAND error and failure rates are constantly increasing as we move to smaller lithographies. When the M500 came out the 128Gbit NAND was very new and Crucial/Micron wanted to play it safe and dedicated quite a bit of NAND for RAIN to make sure the brand new NAND wouldn't cause any reliability issues down the road. In a year a lot happens in terms of maturity of a process and Crucial/Micron are now confident that they can offer the same level of endurance and reliability with less parity. The parity ratio is 127:1, meaning that for every 127 bits there is one parity bit. This roughly translates to 1GiB of NAND reserved for parity in the 128GB M550 and 2GiB, 4GiB and 8GiB for the higher capacities.
Feature wise the M550 adopts everything from the M500. There is TCG Opal 2.0 and IEEE-1667 support, which are the requirements for Microsoft's eDrive encryption. Along with that is full power loss protection thanks to capacitors that provide the necessary power to complete in-progress NAND writes in case of power loss.
Update: Micron just told us that in addition to the capacitors there is some NAND-level technology that makes the M550 even more robust against power losses. We don't have the details yet but you'll be the first to know once we got them.
NAND Configurations | ||||
Raw NAND Capacity | 128GiB | 256GiB | 512GiB | 1024GiB |
RAIN Allocation | ~1GiB | ~2GiB | ~4GiB | ~8GiB |
Over-Provisioning | 6.1% | 6.1% | 6.1% | 6.1% |
Usable Capacity | 119.2GiB | 238.4GiB | 476.8GiB | 953.7GiB |
# of NAND Packages | 16 | 16 | 16 | 16 |
# of NAND Die per Package | 1 x 8GiB | 2 x 8GiB | 2 x 16GiB | 4 x 16GiB |
Test System
CPU |
Intel Core i5-2500K running at 3.3GHz (Turbo and EIST enabled) |
Motherboard | AsRock Z68 Pro3 |
Chipset | Intel Z68 |
Chipset Drivers | Intel 9.1.1.1015 + Intel RST 10.2 |
Memory | G.Skill RipjawsX DDR3-1600 4 x 8GB (9-9-9-24) |
Video Card |
Palit GeForce GTX 770 JetStream 2GB GDDR5 (1150MHz core clock; 3505MHz GDDR5 effective) |
Video Drivers | NVIDIA GeForce 332.21 WHQL |
Desktop Resolution | 1920 x 1080 |
OS | Windows 7 x64 |
Thanks to G.Skill for the RipjawsX 32GB DDR3 DRAM kit
100 Comments
View All Comments
Hrel - Wednesday, April 2, 2014 - link
no response? Cause I'd really like this explained. Consistency in these charts stays WAY over 100.shatteredx - Thursday, May 8, 2014 - link
Yeah I'm also confused by the conclusions in this article. The M550 consistency numbers look pretty... consistent!Wolfpup - Monday, March 31, 2014 - link
I can't remember if the M500 has capacitors to deal with power loss or not...suppose I should reread the review. Anyway I choose my 960GB M500 because at the time Intel was using Sandforce controllers, and there's no way I'd use a different brand when Crucial/Micron and Intel are making drives.While there are probably theoretically faster drives than my M500, it's not going to be anything obvious. I can't even really tell that my M500 is any faster than my M4 even though it is on paper.
960GB on a relatively affordable SSD is awesome! Its literally at the point where I'd have had to go with a smaller drive to get a 7200RPM mechanical drive LOL
DKN - Wednesday, April 9, 2014 - link
Latecomer to the discussion. I'm currently running a 240GB M500 drive in an old Lenovo T61p (Core2 Duo T8100). Changing from a 7200RPM HD to the SSD made all the difference in the world as far as day to day use of the laptop.Some things, like logging on are about 5x faster than with the HD. Other things are 10x or more faster, making this old laptop work better than some i7 machines with HDs in the office.
Note that the T61p originally supported SATA 1 and with a BIOS upgrade, it's now SATA 2, so the transfer rates are in line with the capability of the SSD hardware. Purchasing a drive that can support SATA 3 transfer rates wouldn't do anything for the performance of this computer.
The bottom line? While the enthusiast market is lusting for the latest i7 and graphics processor, there is a large market that just needs something better to make their computers work faster.
I'm considering upgrading my two laptops at home with M500 drives. The slower machine with a 240GB and the faster (i7, 2nd Gen) with a 480GB.
Crucial's decision to continue to market the M500 series makes perfect sense for 90% of the users, even if it isn't as fast as the M550.
stevo5800 - Thursday, April 17, 2014 - link
Theres a 60% increase from an M500 and M550 random write but you guys say there is no increase in performance? LOL The average user probably just uses Windows and a few games, so all these drives would perform around the same in the end. Crucial's biggest issue was the lack of higher write speeds. On M500 and earlier write speeds where really low compared to other drives. Plus Crucial also beats some of the other drives in some of the tests here. Almost every SSD manufacturer makes at least 1 decent SSD now a days. Let's not also forget the M550 is brand new and there is still the chance of improvement in some speeds with a new firmware update, we've seen this before. Heck I still find my M4 speedy and it's got way lower specs then the M550. Personally I'm buying a M550 256GB, I'm going for write speeds.AhDah - Thursday, May 15, 2014 - link
Hello all,I want to buy my first SSD
I'm deciding between Crucial M550 1TB and Samsung 840 Evo 1TB
On the Samsung 840 Evo, the TRIM validation graph shows a tremendous performance drop after a few gigs of writes, even after TRIM pass, the write speed is only 150MBps.
Does this mean once the drive is 75%-85% filled up, the write speed will always be slow?
Crucial M550 on the other hand, has a consistent write speed according to the TRIM validation graph.
Should I get the Crucial M550 because of this?
thanks!
critter13 - Thursday, May 15, 2014 - link
I have a 2007 MBP which is obviously SATA II. Is it worth getting a m550 or 840 EVO or will I not see the extra speed? should I save a little money and just go with the m500?SyndromeOCZ - Friday, May 30, 2014 - link
Seriously why do you make the title of the article a link? Ok if it was a link that actually went anywhere but a link that goes directly to the page I'm viewing. Doing this makes it about 1000 times harder to copy paste parts out of the title, forcing me to have to go through the article to find the part I want to copy. Which in turn forces me to want to never come back to Anandtech again. Just my $0.02ayejay_nz - Sunday, February 15, 2015 - link
Any word on whether the MU02 firmware update, released 01/8/2015, for this drive boosted performance?The release notes can be found here - http://www.crucial.com/wcsstore/CrucialSAS/firmwar...
I'm not sure if the items they've listed as improving would increase performance?
pokazene_maslo - Tuesday, October 3, 2017 - link
In changelog they mentioned improved power efficiency. Could anyone test power consumption in idle after FW upgrade?