On almost all PC technology forums, it is hard to escape users talking about what Intel’s next processor lineup will be. Due to initial yield issues in Intel’s 14nm node, Broadwell in both mobile and desktop ended up being delayed, somewhat substantially in the case of the desktop. So while motherboard manufacturers released their Z97 platform over 6 months ago, we have been waiting for Broadwell to arrive. That day is today, and we can lay the smackdown with some benchmark numbers too.

The Road to Broadwell

Broadwell, in its top level explanation, is the 14nm die shrink of Haswell which was built on 22nm. Using Intel’s 14nm process this results in a smaller silicon die and lower power consumption. Frequency will depend on the architecture and if the process is suited to frequency or power, but the CPU core underneath is still more-or-less Haswell, with some minor tweaks of course.

As part of Intel’s tick-tock strategy, this would be considered a tick:

Intel's Tick-Tock Cadence
Microarchitecture Process Node Tick or Tock Release Year
Conroe/Merom 65nm Tock 2006
Penryn 45nm Tick 2007
Nehalem 45nm Tock 2008
Westmere 32nm Tick 2010
Sandy Bridge 32nm Tock 2011
Ivy Bridge 22nm Tick 2012
Haswell 22nm Tock 2013
Broadwell 14nm Tick Core-M: 2014
Others: 2015

If history tells us anything, ticks are usually accompanied by small IPC increases, resulting in 5-10% better performance depending on the benchmark, but ultimately ticks still follow the same capabilities of the processor before them. Intel usually uses its ticks to introduce a new chipset with a large number of capabilities, which we saw with Z97 and its use of M.2/SATA Express on the chipset. If the classical idea of a three year cycle between upgrades is true, then back in the summer of 2012, we were playing around with Ivy Bridge, the tick to Sandy Bridge.

The Broadwell Launch

Back in mid 2014, Intel launched Core M, the first 14nm processor in the mass market and the first Broadwell based product. Core M is the official marketing designation for what was historically the Y series processor (Broadwell-Y), but Core M played a different role to other Y series processors. Core M brought the Core architecture down to a 4.5W thermal design, enabling small and thin fanless 2-in-1 laptop/tablet designs. When the first products started appearing around Christmas and CES, we tested a few and even got down and dirty with the questions that OEMs had to answer with their own chassis designs.

At CES (January 2015), Intel launched Broadwell-U. These devices are aimed more at traditional laptops, mini-PCs and all-in-ones, with the lower-wattage SKUs targeting devices in the 15W range. At the same time higher power 28W SKUs were also announced, with the graphics gamut migrating through the basic Gen 8 package up to Crystal Well based Iris Pro, using onboard EDRAM as an additional cache to improve graphics performance.

After Y and U in Intel’s naming scheme typically comes H, representing higher power (47W-65W) mobile processors or ones suitable for all-in-one type desktop replacement devices which are, for the most part, stationary. H processors are favorites in business due to their high performance, but typically these devices also require large batteries and can come with large (15-17”) screens. They are all soldered down parts as well. Technically some of the H processors are part of the launch today.

After Y, U and H is somewhat of a miasma. The processor lineup, depending on who you speak to, might be DT, S, T, or K. Some of these are also used in the processor names themselves, but we will use Broadwell-DT for consistency. Normally an Intel desktop processor lineup spans a gamut of SKUs, from Celerons, Pentiums, i3, i5 and up to i7. Some ranges consist of 50 or so SKUs, whereby one segment (i5/i7, for example) are launched first and the rest are launched later.

Broadwell-H Die Map

That brings us to today. All-told, Intel is launching ten different SKUs, five 47W laptop and five 65W 'desktop', using a mix of socketed (LGA) and soldered (BGA) parts. All five desktop SKUs are still technically Broadwell-H, and all five are 65W quad-core models featuring Intel's Iris Pro integrated graphics and the product's associated Crystal Well L4 cache. Meanwhile in an interesting turn of events, the two socketed models will be breaking the mold by becoming the first H-family processors to be socketed. These will be the parts we're looking at today.

The Effect of TDP

If we move back to those large processor stacks, Intel tends to produce a range of products from 15W TDP (extreme low power Xeon) through 35W, 55W and up to 84-88W for consumer then 160W for Xeon. Sticking with the consumer line for the moment, the high end overclocking models have recently sat in that 84-88W bracket, donning the i5-K or i7-K moniker and being some of the most talked about processors on forums and for custom builds. Broadwell changes this, and a lot of users might not expect it to.

Because the top Broadwell-DT SKUs are based on Intel's Broadwell-H design, both of the these SKUs ship with a TDP of 65W. As a result, frequencies on the cores are lower, and it means that these processors are best suited for comparison to 65W Haswell processors, such as the i7-4790S or i5-4590S, rather than the i7-4770K or i7-4790K. Thus users looking to upgrade their i5-K or i7-K might be wondering where their 84W processor is.

But both Broadwell-DT processors are overclockable, which adds an element of intrigue. I’ll speak specifically about the Crystal Well implementation in a second, but whether having that extra eDRAM on board effect overclocking is going to be a poignant question moving forward. If a 4.6 GHz Haswell user can also achieve 4.6 GHz on Broadwell, then the benefit of any IPC increase along with the eDRAM might be a driver for purchase. Unfortunately althugh both of the socketed chips are unlocked, due to both time constraints and severe pre-release firmware issues, we're going to have to save overclocking on Broadwell-DT for Part 2 of our coverage.

Integrated Graphics

Intel announced several months ago that Broadwell would be getting the first socketed processor with a Crystal Well implementation that would also be overclockable. For a number of us in the industry, this piqued our interest substantially. Crystal Well, Intel’s name for CPUs that carry extra eDRAM, offers the potential to alleviate DRAM pressure by acting as an L4 cache, but also gives more memory bandwidth for integrated graphics. Given that integrated graphics are typically memory starved to begin with, Crystal Well when announced was an interesting prospect. Unfortunately, for Haswell based models, Intel limited the project to soldered processors only, which meant there was no possible direct desktop comparison. This changes with Broadwell-DT.

Aside from this, in terms of integrated graphics only usage, Broadwell-DT has a full GT3e configuration of execution units that a Broadwell processor has been announced to have. On Core-M we see 24 EUs, Atom x7 with 16, Pentium/Celeron Broadwell-U has 12, while there are various models with 23 or 24 EUs in the Broadwell-U i3/i5 and i7 lines and a few Broadwell-U models with the full 48 EUs with Iris Pro 6100. There will be some Broadwell-H models with 48, which is the number that Broadwell-DT models with the designation ‘C’ or ‘R’ will have.

The current king of the socketed integrated graphics world is AMD’s A10-7870K, which we recently reviewed. Broadwell-DT with Crystal Well is going after that crown.

SKUs, Chipsets, & More
Comments Locked


View All Comments

  • chizow - Tuesday, June 2, 2015 - link

    Not really sure how appealing this will be for anyone on LGA1150 for the desktop, given Skylake is just around the corner. Certainly more appealing to heavy duty laptops, maybe NUCs for the better GPU capabilities but the prices are too high compared to low-end CPU + dGPU options (Alienware Alpha at $400-500 comes to mind).
  • CuriousBeing - Tuesday, June 2, 2015 - link

    I could never understand why the FX-8350/FX-8370 are never used in these benchmarks....
  • Refuge - Tuesday, June 2, 2015 - link

    It is probably because of the new test setup. They haven't re-run everything yet.

    Not that I consider that a good excuse, I know they are busy though and it is an answer to your question at least if that helps. :P
  • junky77 - Tuesday, June 2, 2015 - link

    Broadwell is not for users who want high integrated GPU performance or something like that
    It's an upgrade root for many with Haswell
  • alacard - Tuesday, June 2, 2015 - link

    Ian, buddy, you really need to step up your game when it comes to analyzing power, temperature, and noise. Seriously, Anandtech used to be a place where you could read a review on a product and have all the information you needed about it and now once i'm done reading an Anandtech review i have to look elsewhere to get the full story.

    Old Anandtech: Comprehensive and comprehensible.
    New Anandtech: Comprehensible only because the reviews have become utterly incomprehensive.

    Step it up buddy.
  • Navvie - Thursday, June 4, 2015 - link

    A bit harsh, but agree with the point. I'm now waiting (hoping) that somebody at Ars or TPU gives a more comprehensive review.

    This Delta power consumption shit has to go as well.
  • Harry Lloyd - Tuesday, June 2, 2015 - link

    So the actual CPU part takes up less than half the die. My forehead cannot take much more of this, there are just to many facepalms these days.
    And this is what they want us to pay $276 for - a CPU that would take up much less than 100 mm2 and should cost $100.
    God, please, let Zen be a good CPU, please. I will pray every day, I want Haswell to be my last Intel CPU for a long time.
    I would just like to point out, than an i3 with a 750 Ti will destroy this APU, offering PS4 performance in every single game, for pretty much the same cost.
  • Namisecond - Wednesday, June 3, 2015 - link

    Don't expect Zen to be a some "cheap chip" AMD has stated they're going to focus on performance rather than cost. I'm expecting Zen with HBM to cost as much as comparable Intel offerings.

    Rather than complaining about the cost of new cutting edge hardware, put your money where your mouth is and get the i3 + 750TI. I have one here and it serves well as a secondary machine (as well as a doorstop). I'd much rather use my 2500K + 960...
  • shelbystripes - Tuesday, June 2, 2015 - link

    I'd really love to see benchmarks of Civilization V on this thing. With such a CPU-intensive game, it'd be interesting to see how much the L4 cache makes an impact, not just with integrated graphics, but also when using dedicated graphics, to see how much the L4 cache helps the raw CPU performance in a game that is so easily CPU-constrained...
  • Peichen - Tuesday, June 2, 2015 - link

    I think Civ 5 is still single thread or maybe dual thread and have to process everything in order so each term still take minutes. I have the game at launch and all packs & DLCs and it doesn't stress my overclocked 3770K a bit. No core hits above 40% yet a term still takes forever. The game isn't 64-bit either so there is also that.

Log in

Don't have an account? Sign up now