In early July we introduced our new Build-A-Rig project. The aim of the project, with help from our partners Newegg, is to approach the companies  that make up the personal computing industry roughly every quarter and ask them to create a list of components within a certain budget  aimed at a particular user base. Aside from that there are no rules, and at the end of the day the systems would be built and tested by AnandTech to be given away to our readers.

For each build we would interviews the individuals from the companies who we work with about the state of the PC industry and their chosen components, critique the components used, write up build logs for each system and then provide performance numbers. This round is our first, and we spoke to Chinny Chuang from Zotac and Dustin Sklavos from Corsair to create a parts list for a $1500 single monitor gaming system. Zotac went more for style and ease of use, Corsair went more for pure power, and we carefully dissected each component chosen in our previous.

But before we get to the performance numbers, we had a look at just how easy these two systems were to build, in the form of build logs. Ganesh tackled Zotac's Hey Good Lookin', while Ryan built up Corsair's The Accelerator. Game on!

Building Zotac's Hey Good Lookin'

Build Log by Ganesh TS

 

Zotac's Hey Good Lookin'
Component Selection Price
as Chosen
90-Day
Average
Processor (CPU) Intel Core i5-4460 $189.99 $189.85
Motherboard GIGABYTE GA-Z97X-UD3H-BK $139.99 $138.17
Graphics Cards (GPU) Zotac GTX 970 AMP! Extreme Core Edition $369.99 $369.99
Memory (DRAM) Corsair Dominator Platinum
2x4GB DDR3-1866 C9
$99.99 $104.27
Storage (SSD/HDD) Crucial BX100 500 GB SSD $189.99 $188.39
Power Supply (PSU) Rosewill Quark 750W Platinum $139.99 $135.31
Chassis NZXT S340 Black Steel
ATX Mid-Tower
$69.99 $69.99
CPU Cooling Corsair Hydro Series H100i GTX* $109.99 $119.99
Operating System Windows 8.1 Full Version $119.99 $119.99
Extras SilverStone Sleeved
6-pin to 6-pin x2
$14.98 $14.98
SilverStone Sleeved
EPS12V 4+4-pin
$7.99 $7.99
SilverStone Sleeved
24-pin
$12.99 $12.99
Samsung USB 2.0
External DVD Drive
$23.99 $23.82
DEEPCOOL RGB LED
Strip with Controller
$16.99 $16.99
Total   $1,506.85 $1,492.58

*In our first breakdown of parts, we mislabelled this part as the H100i.

Zotac's big list of components came from Newegg in two shipments. The NZXT S340 case came in first. A big Newegg box with the rest of the components came in a couple of days later.

The NZXT S340 Black Steel ATX Mid-Tower chassis is a $70 case. Despite its low price, it offered a number of features aiding in easy assembly of the system.

  • The side panels were easily removed without the aid of a screwdriver, thanks to the thumbscrews.
  • The case was nicely divided into specific compartments for the installation of the motherboard, the PSU and the SATA drives.
  • The case made it easy to manage the cables and keep them out of sight.

On the flip side:

  • The case weighed in at slightly more than 7 kgs. when empty, and the sticky rubber feet made it a bit difficult to maneuver the case around when installing components.
  • The sharp edges of the case had to be kept in mind while handling the case
  • Though there was enough clearance between the edge of the motherboard area and the front panel for installing the fans of the liquid cooler in the build component list, readers contemplating the usage of the NZXT S340 and a liquid cooler would do well to research the fan / radiator dimensions (the clearance is 57mm)

The GIGABYTE GA-Z97X-UD3H-BK Z97 motherboard chosen by Zotac has all the features one would expect in a Z97 board, along with server-class burn-in testing. The board gave little cause for complaint during installation. It would have been nice to have a combo-connector to enable easy hook-up of the front panel cables to the motherboard pins, but, thankfully, the design of the internals of the case as well as the motherboard positioning alleviated the issue. In addition a USB key with the drivers for the post-build setup process would have been nice, but Zotac included an external DVD drive in the build list anyway. Having been accustomed to motherboards with Wi-Fi capabilities over the last few generations, I made the mistake of starting the build process away from a wired networking outlet. A temporary USB WLAN adapter helped in getting the updates processed once the OS was installed.

In my personal builds, I usually opt to go with the stock cooler that comes along with the CPU for cost. Zotac's build, however, use the Corsair H100i GTX liquid cooler for a couple of reasons - the fan noise is greatly reduced (thanks to the 120mm fans that mount on the front side of the chassis) and the CPU is able to keep a lower temperature under sustained loading compared to the stock cooler. In addition, the build process was also much simpler - there was no thermal paste to explicitly deal with, since the H100i GTX came with the thermal paste pre-applied. It was a simple matter of hooking up the cooler according to the directions provided and mounting the fans and the radiator. The thickness of the H100i GTX fans comes is 30mm, and that of the radiator is 25mm. There was no trouble mounting this in the 57mm clearance provided by the case. The Corsair H100i GTX also comes with the Corsair Link monitoring and control. The cable was connected to one of the free USB 2.0 ports on the motherboard.

The Rosewill Quark 750W Platinum PSU is modular in nature. Connecting cables to only the necessary outlets helped reduce clutter and made the installation / cable management much simpler. The yellow and red cables that came with the PSU unfortunately didn't go well with the rest of the colors on the motherboard side, and so the Silverstone sleeved cables that Zotac also included in the build came to the rescue. The PCIe power cables, 8-pin 12V connector as well as the 24-pin ATX power connector were terminated on the opaque side of the chassis and only the Silverstone sleeved cables were made to appear on the transparent side.

The Zotac GTX 970 AMP Extreme was installed in the PCIe 3.0 x16 slot closest to the CPU. The dual slot card also blocks one of the PCIe x1 slots in the board. The case itself has more than enough clearance to accommodate cards of this size, and the installation was a breeze. The top of the card has Zotac's logo that can be seen clearly through the transparent side of the case. The three fans cooling the GPU also point downwards and don't interfere with the look of the build.

Ian has already covered the details of the other component choices (Intel Core i5-4460, Crucial BX100 and the Corsair Dominator Platinum 8GB DRAM kit). There is not much to add, except that the looks of the Corsair Dominator Platinum and the light bar definitely enhance the visual appeal of the build during operation.

Zotac also included a DEEPCOOL RGB LED Strip with Controller in their build to spruce up the look of the system. There are multiple ways to mount it in the NZXT S340 chassis. We decided to leave it to the preferences of the eventual winner of the system to install it appropriately.

Building Corsair's "The Accelerator"
POST A COMMENT

53 Comments

View All Comments

  • Ben Derdunnet - Sunday, August 2, 2015 - link

    Gaming interests me not at all, but video editing/rendering does. It's not clear to me how this kind of focus would be better served by either of these two builds, or something else altogether. Reply
  • Beaver M. - Monday, August 3, 2015 - link

    Those are stupid configs...
    Zotacs:
    - Too powerful and too expensive PSU. A 500W one for under $100 would have been more than enough.
    - Useless and too expensive cooler. An air cooler would have been quieter, wouldnt have much different temps and would have been $30 to $70 less expensive.
    - Weak CPU compared to the GPU. That CPU just doesnt fit this GPU. Either get a i7-4790k/i5-4690k or a GTX 960.
    - Too much useless bling bling.

    The Corsair one is much better, but still could use some improvements.
    - Cooler is just useless. You dont need a CLC in that price range. I wont be better than a good air cooler, but it will be louder and more expensive.
    - Not enough storage.
    - Still too powerful PSU.
    - GPU and CPU dont really mix. The GPU is too fast for the CPU. Plus the mainboard is a very cheap one. Those 3 things just look stupid together, even if there was a limit of $1500.
    Reply
  • chaotic0ne - Monday, August 3, 2015 - link

    The H100i is a complete waste of money. You'd be better off getting a K model chip that can be OC'd and use a 212+ evo cooler instead, and it would cost about the same. I don't even see why this build was showcased.

    For $1500 you should be able to build a 980TI rig. A single 970 for a $1500 build is kinda weak. That's a 1k build GPU.
    Reply

Log in

Don't have an account? Sign up now