External Appearance

In terms of specificiations, it's important to point out that the SX800-LTI is not a product that is fully compliant with the SFX specifications. As with nearly all high output SFX designs, the SX800-LTI is an “SFX-L” PSU that meets all of the SFX specifications, except from the length. It is the longest SFX unit that we have ever seen to this date, measuring 125 (W) × 63.5 (H) × 130 (D) mm (4.92" x 2.5" x 5.12"), a good 30 mm deeper than a SFX-compliant unit. This added length significantly limits the compatibility of the PSU, as a large percentage of the SFX case designs do not offer that much clearance.


Typically for a SilverStone PSU, the design of the SX800-LTI is simple, yet not aesthetically apathetic. A satin black paint with good anti-fingerprint properties covers the chassis and the company logo is subtly embossed at the top side of the PSU. Both the fan and the finger guard are black, with no lighting, but with a metallic crest featuring the company’s logo covering the fan’s engine. A dark sticker with the electrical specifications and certifications of the PSU can be found on its left side. On the right side of the chassis, which usually is out of the view of case windows, SilverStone placed the necessary white production (serial, version) and quality control stickers.

It is noteworthy to mention that SilverStone managed to fit an on/off switch next to the AC cable receptacle on the rear side of the SX800-LTI, something not very common on high power SFX designs. The front side is covered by the asymmetrically placed cable connectors. The placement of the rightmost two connectors suggests that this chassis was not initially meant to have that many connectors and that they were added by the designer after they managed to squeeze the components for an 800W behemoth in that small chassis. All of the cable connectors except from those of the ATX cable are covered with plastic protective caps.

Internal Design

A major advantage of the SFX-L chassis is that it allows for 120 mm fans to be installed, a necessity for consumer-grade products where sound pressure must be kept down to civil levels. Globe supplies the low profile 120 mm fan that we found in the SX800-LTI. It is a standard sleeve bearing model with a maximum speed of 2300 RPM at 12 Volts. Many enthusiasts will voice concerns regarding the reliability of such a high speed fan in comparison to other bearing designs, but SilverStone generally prefers to use sleeve bearing fans because of their lower noise output, even for their top-tier products. At the very least, Globe is a company with a proven high reliability record.

Most people would reasonably presume that the SX800-LTI is just a beefed-up or upgraded version of the SX700-LPT. That is not the case as the SX800-LTI is an entirely different design and is also coming from a different OEM. Enhance Electronics is behind the creation of the SX800-LTI, the OEM behind most of SilverStone’s PSUs.


The platform that the SX800-LTI is based on is not simple, yet not particularly advanced either. It is based on a proven recipe, with an LLC resonant half-bridge inversion circuit on the primary side and a typical single (12V) converter on the secondary. The minor rails are being generated via DC-to-DC converters. We have seen the same core design in computer PSUs of all efficiency ranges, including 80Plus Bronze certified units. Enhance Electronics managed to reach 80Plus Titanium efficiency levels by simply replacing the typical active electronic parts with their first-rate counterparts that have minimal energy losses. However, these ultra-high efficiency parts are many times more expensive than the typical parts we typically find in mainstream units, significantly increasing the production cost of the PSU.

Most of the filtering stage parts are behind the AC receptacle, with a few onto the main PCB. There are a total of four Y capacitors, three X capacitors, and two filtering inductors. The single rectification bridge is sharing the same large heatsink as the APFC and primary inversion side components. The passive PFC components are a large shielded filtering inductor and two 420V/270μF capacitors from Rubicon. The capacitors are the largest SilverStone could fit in there and they are practically touching the heatsink, which is worrying considering that temperature is one of the primary factors affecting the longevity of capacitors.


Despite the large heatsink housing the primary side components, there is virtually no heatsink for the secondary side conversion MOSFETs. They are mounted on the underside of the PCB and they are so efficient that the chassis of the PSU alone provides more than enough heat dissipation for them to operate seamlessly even when heavily loaded. The capacitors on the secondary side are a mix of electrolytic and solid-state products, and are coming from several different companies. We identified Rubycon, Nippon Chemi-Con, Nichicon, and Unicon capacitors in the mix. The first three companies are very well known and respected. Unicon on the other hand is not such a popular manufacturer, but they too are a Japanese-based company.

Introduction, Packaging & Bundle Cold Test Results (Room Temperature)
Comments Locked


View All Comments

  • WithoutWeakness - Thursday, January 18, 2018 - link

    Now that we have multiple options for medium-to-high output SFX power supplies I would like to see more case manufacturers design cases that drop ATX support and only support SFX PSUs. It's been amazing to see the designs that smaller case makers and newcomers have made when designing for the smallest cases possible and SFX PSUs have enabled them to dedicate less space for bulky ATX PSUs.
  • DanNeely - Thursday, January 18, 2018 - link

    On larger cases saving an inch on the PSU is a much smaller return than it is on mITX systems. Between the higher prices and much lower availability of SFX/SFXL PSUs I don't think we'll ever see widespread adoption of them in mATX/ATX cases.
  • jtd871 - Thursday, January 18, 2018 - link

    WithoutWeakness wasn't talking about larger cases. He was talking about cases without support for ATX PSUs.
  • cjb110 - Friday, January 19, 2018 - link

    Not sure they can do that and still call it an ATX case, which then makes marketing a potential nightmare, that might be one reason.
  • Valantar - Monday, January 22, 2018 - link

    There are a couple from Lian Li, and the Kimera Industries Cerberus is nice (if you can get it), but yeah, the selection is limited. I'd love to see more SFX+mATX or SFX+ATX cases. Why not?
  • jrs77 - Thursday, January 18, 2018 - link

    I've got the 500W SFX-L PSU from Silverstone and it's the sweetspot for a single GPU-system imho.
  • meacupla - Thursday, January 18, 2018 - link

    At this wattage, it's more like "We crammed in 800W, because we could".

    Even if you assembled the most powerful mITX system, using an Asrock X299E-ITX, an i9-79xx and 1080Ti and overclocked those, you would still be inside of 600W power envelope at full load.
    (Going off of Coolermaster's power calculator)
  • edzieba - Thursday, January 18, 2018 - link

    Don't forget SFF cases for mATX and ATX. While 800W is not enough for the quad Titan-V beast (smallformfactor DOT net/forum/threads/kimera-industries-cerberus-the-18l-matx-usa-made-enclosure.454/page-180#post-78461), you you drop back to a mere two Titan Vs - either on an mATX board or with ITX and PCIe Bifurcation - you can cram serious compute into an even smaller case.
  • jordanclock - Thursday, January 18, 2018 - link

    Because conversion efficiency is best at about 50% load, so you use a PSU like this to stay within the most efficient load range.
  • Holliday75 - Thursday, January 18, 2018 - link

    How much does that translate in savings on my electric bill? How quickly would that offset the cost of a higher wattage PSU running more efficiently?

Log in

Don't have an account? Sign up now