Seagate: Hard Disk Drives Set to Stay Relevant for 20 Years
by Anton Shilov on December 18, 2015 10:00 AM ESTThe very first hard disk drives (HDDs) were demonstrated by IBM back in 1956 and by the early 1980s they became the dominant storage technology for all types of computers. Some say, hard drives are no longer relevant as solid-state drives offer higher performance. According to Seagate Technology, HDDs will remain in the market for at least 15 to 20 years. In a bid to remain the primary bulk storage device for both clients and servers, hard drives will adopt a multitude of technologies in the coming decade.
“I believe HDDs will be along around for at least 15 years to 20 years,” said David Morton, chief financial officer of Seagate, at the Nasdaq 33rd Investor Program Conference.
Sales of HDDs Decrease, But Technology Keeps Evolving
Sales of hard disk drives have been decreasing for several years now. Total available market of HDDs dropped to 118 million units in the third quarter of 2015, according to estimates by Seagate Technology and Western Digital Corp. By contrast, various makers of hard drives sold approximately 164 million units in Q3 2010, the two leading manufacturers claim.
Shipments of HDDs decrease due to a variety of factors nowadays, including growing popularity of solid-state drives (SSDs), drop of PC sales, increasing usage of cloud storage and so on. Nonetheless, HDDs remain the most popular data storage technology, which is also the cheapest in terms of per-gigabyte costs. While SSDs are generally getting more affordable, high-capacity solid-state drives are not going to become as inexpensive as hard drives any time soon. As a result, HDDs will remain a key bulk storage technology for a long time.
To stay relevant in the long term, hard disk drives need to keep increasing their capacity. Last year ASTC (Advanced Storage Technology Consortium), an international organization that unites various companies who develop, manufacture or use hard disk drives, unveiled its vision of the HDD future. According to this technology roadmap, capacity of hard drives will rise to 100TB by 2025. In the coming years HDDs will adopt many new writing technologies in a bid to bolster their data storage capacities.
PMR, SMR and Helium
Modern hard disk drives are based on perpendicular magnetic recording (PMR) and shingled magnetic recording (SMR) technologies. PMR-based drives have been around for about a decade and will remain popular for years to come thanks to their relatively high sequential performance, low cost per gigabyte, and well-understood reliability.
HDDs that use shingled recording write new tracks that overlap part of the previously written magnetic tracks. The overlapping tracks may slowdown writing because the architecture requires HDDs to rewrite adjacent tracks after any writing operation. While SMR allows increasing areal density of hard drives to 1.1 Tbit per square inch or even higher, performance of such HDDs may be lower compared to performance of PMR-based devices. In a bid to “conceal” peculiarities of SMR, which can slowdown performance, makers of HDDs develop special firmware or even alter software applications that use such hard drives in datacenters.
To boost capacities of PMR and SMR hard disk drives today without increasing areal densities, HDD makers need to install more platters into their devices. While it is possible to fit six disks into a standard 3.5” HDD thanks to new technologies, more platters require major redesigns and use of helium inside the drives. The density of helium is one-seventh that of air, which reduces drag force acting on the spinning disk stack and lowers fluid flow forces affecting the platters and the heads. The lower density of helium allows to fit up to seven disks into one drive today, reduce power consumption of HDD motors and improve accuracy of arm’s positioning, something that is important for high bit densities too. Unfortunately, hermetically sealed helium-filled HDDs are rather expensive to manufacture, which is why at present they are positioned for datacenters.
At present only HGST, a wholly-owned subsidiary of Western Digital, ships helium-filled Ultrastar He and Ultrastar Ha hard disk drives in high volume. The company sold around 1.1 million sealed HDDs in Q3 2015 and demand for such drives is increasing. Seagate Technology plans to introduce its helium-filled HDDs in the first half of 2016.
TDMR Incoming
Earlier this year Seagate announced plans to start commercial shipments of hard disk drives featuring two dimensional magnetic recording (TDMR) technology in the next couple of years. Heat-assisted magnetic recording technology (HAMR) — that has been demonstrated for multiple times so far by various manufacturers of hard drives, heads and platters — is still not ready for prime time, according to Seagate. The world’s second largest maker of HDDs claims that reliability of devices based on HAMR is not sufficient, which is why the tech will be used commercially at a later date.
“We talked last year about two dimensional magnetic recording, we will be ready to ship that in the next year or two,” said Dave Mosley, president of operations and technology at Seagate, at the company’s analyst and investor strategic update conference in September. “HAMR is still not ready for prime time, I was not tremendously happy with the progress made last year, but there was a progress.”
TDMR technology allows to increase areal density of hard disk drives by making HDD tracks narrower and pitches even smaller than today. Since tracks are projected to become narrower than actual magnetic read heads, it will get increasingly hard for the latter to perform read operations because nearby tracks will create too much inter-track interference (ITI). HDDs featuring TDMR technology counteract ITI by reading data from multiple nearby tracks and then determining which data is needed. The industry is working on several implementations of TDMR. It is possible to read data from multiple adjacent tracks using one reading head, but that greatly reduces performance of HDDs. Alternatively, it possible to use an array of heads to read data from several nearby tracks. While such approach guarantees rather high performance, it is very hard to build a complex array of multiple readers. TDMR lets HDD makers to increase areal density by 5 to 10 per cent, according to Seagate. Moreover, it also solves ITI problems that will likely occur in the future. As a result, it is logical to expect all HDD makers to use two dimensional magnetic recording technology in the future.
HAMR Not Ready for Prime Time
Hard drives featuring heat-assisted magnetic recording technology — as the name implies — record data on high-stability magnetic media with laser thermal assistance to reduce its coercivity for a very short amount of time. Seagate’s HAMR technology heats media to approximately 450°C using a laser with 810nm wavelength and 20mW power, according to details revealed by the company earlier this year. The method helps to reduce size of magnetic “pitches” without undesirable effects on readability, write ability and reliability.
Hard drives with HAMR technology will sport significantly higher areal densities — around 1.5Tbit per square inch initially and 2Tbit per square inch shortly after introduction — and will be able to store noticeably more data than today’s HDDs featuring perpendicular recording technology. Eventually, companies like Seagate expect that HAMR will help to increase bit densities of hard disk drives to 5Tbit per square inch. While TDMR technology is important, HAMR will mean a breakthrough for areal densities and capacities of HDDs.
“The highest areal density that we see today have to be written with HAMR,” said Mr. Mosley. “We still have some issues working through the reliability. We have actually solved a lot of problems, but the whole industry — through various consortiums — is really focused on getting the last of the problems solved so we could get [HAMR] into the products.”
Seagate hopes to deliver its first HAMR-powered hard disk drives with 4TB capacity sometimes in late 2016 or early 2017 to select clients. The customers are expected to tryout the HDDs in their datacenters, verify that HAMR drives are compatible with their infrastructure, and are generally reliable. Volume shipments of HAMR-based HDDs are now expected to start in late 2017, or even in 2018. Unfortunately, at this point the HAMR roadmap is not completely clear.
Long Road Ahead
In addition to two dimensional magnetic recording and heat-assisted magnetic recording technologies — that Seagate expects in commercial products in 2016 – 2017 and beyond — other technologies are being researched by the industry. Among those already disclosed are Bit Patterned Media Recording (BPMR), Heated Dot Magnetic Recording (HDMR), Microwave-Assisted Magnetic Recording (MAMR) and some other. In the future, hard disk drives will adopt combinations of various technologies to maximize bit densities and capacities.
Technologies like TDMR, HAMR or BPMR will be commercialized by manufacturers like Seagate, Western Digital and Toshiba. However, there are many companies and universities, who explore technologies for future hard disk drives. For example, reliability of HAMR-based HDDs is something addressed by the whole industry, not just by Seagate or Western Digital. Such collaborative approach and with continuing investments into fundamental magnetic recording research increases the likelihood of many technological breakthroughs going forward. The latter may guarantee that HDDs will remain relevant for a long time — for at least 15 to 20 years, according to Seagate.
If HDDs remain in the market in 2035, it will mean that the technology will have served the humankind for about 80 years at the time, which is a very long period for any high-tech industry. By the time, HDDs will have outlived floppy discs, cassettes, CRT displays and televisions as well as numerous manufacturers of hard drives.
86 Comments
View All Comments
MrSpadge - Friday, December 18, 2015 - link
They need to tie the performance of SSDs? This would be wasting huge amounts of money for a lost cause. It's impossible in the sense that you'd have to be really stupid about SSD design to make that happen. You don't demand your SSD to match main memory speeds for a good reason, don't you?Keep the HDDs affordable and "fast enough". If you're concerned about sustained transfer speed simply raid a few drives. If you're concerned about random and general suage speeds.. well, there's nothing HDDs can do for you except going to 10k and 15k rpm. Which doesn't make any sense compared to SSDs.
patrickjp93 - Friday, December 18, 2015 - link
It's not difficult at all. Just make the drive heads asynchronous and strip data across platters and platter surfaces. Currently a 6TB WD Black reads and writes at about 210MB/s, but all the arms move to the same locations per platter while only one of them actually does any reading or writing. You can actually multiply current HDD performance by a factor of 10 by doing this, putting it in the 2GB/s reading/writing space, and that's only with 1 column of arms. A number of drives today have multiple arm columns, but only one acts at any moment in time.Seagat and WD will be fine for 2 decades easily. IBM demo'ed asynchronous arms almost 5 years ago. When they enter the foray, along with proper data striping, SSDs will lose the performance benefits on all but the highest end (M.2 ultra NVMe top out at 4GB/s R/W).
The additional engineering cost is tiny.
Gigaplex - Friday, December 18, 2015 - link
That will only increase bandwidth. Latency will still be horrible. The cost of the drive will increase lots too (with a decrease in reliability) as you now need more actuators.qap - Friday, December 18, 2015 - link
If the additional cost was tiny, one of HDD manufacturers would have done it (demo is not the same thing as real product!). It's not and it's borderline impossible to make it viable. It's hard enough to hold one arm over very narrow track.And you are missing the point of why are SSDs so much faster. It's not about sequential speed - they are competitive enough in this area (per dollar). It's about random access and in that area SSDs are 2-3(some even 4) orders of magnitude faster.
saratoga4 - Sunday, December 20, 2015 - link
>It's not difficult at all. Just make the drive heads asynchronous and strip data across platters and platter surfaces.That's all you have to do!
shadowjk - Monday, December 28, 2015 - link
You assume that the tracks will be perfectly aligned so that the heads are in the right position on every platter simultaneously. I imagine this might be possible to achieve once, but any change in environmental conditions would probably throw that off.. After that, you have an engineering challenge of conrolling the temperature precisely enough that the platters remain the exact same size and the tracks remain aligned with those of other platters..nandnandnand - Friday, December 18, 2015 - link
For performance you add additional tiers: NAND SSDs, Intel 3D XPoint or other next-gen memory, and DRAM. A system could include DRAM, XPoint, SSDs, disks, and tape if it were designed carefully.e_sandrs - Friday, December 18, 2015 - link
This always kills me: "Shipments of HDDs decrease due to a variety of factors nowadays, including...increasing usage of cloud storage"Oh, ok, now that data is being stored "in the cloud", I'm glad we don't need HDDs anymore! [/sarcasm]
Psst: There is NO CLOUD, just other people's computers. Do we need that clarification at Anandtech today?
Sunrise089 - Friday, December 18, 2015 - link
The chart is hard drives SALES, not hard drive capacity. Moving to cloud storage means fewer but larger drives, likely operating closer to capacity. "Increasing usage of cloud storage" is absolutely a factor in shrinking sales numbers.MrSpadge - Friday, December 18, 2015 - link
Yep. And it's also a factor in increasing the average selling price of HDDs.