StarTech.com TBT3TBTADAP Thunderbolt 3 to Thunderbolt Adapter Reviewby Ganesh T S on August 3, 2016 11:00 AM EST
- Posted in
- Thunderbolt 3
Thunderbolt 3 has got off to a great start as the premium choice for high-speed external I/O - be it external GPU docks or for taking full advantage of PCIe SSDs. Unlike the first two versions of Thunderbolt (which used a mini-Display Port connector), Thunderbolt 3 opted for a USB Type-C connector. There are a number of Thunderbolt 3 devices in the market that are currently certified for use with PCs sporting a Thunderbolt 3 port. However, there are also a large number of legacy Thunderbolt / Thunderbolt 2 products that are certified for use with both PCs and Apple devices. While introducing Thunderbolt 3, Intel promised the delivery of a Thunderbolt 3 to Thunderbolt adapter for modern TB3-equipped PCs to be able to talk to the legacy devices. There has been considerable delay in getting this product to the market since that announcement, but, the adapters have now been selling for the last couple of months.
The StarTech.com TBT3TBTADAP Thunderbolt 3 to Thunderbolt Adapter
The TBT3TBTADAP is meant for use with PCs sporting the new Thunderbolt 3 Type-C interface. It can be used to connect legacy Thunderbolt peripherals to those PCs, but, not vice-versa (i.e, one will NOT be able to use it to connect a Thunderbolt 3 peripheral to a PC equipped with a legacy Thunderbolt port).
The TBT3TBTADAP package comes with the main adapter and a quick-start guide. The adapter has a permanently attached 8 in. cable with a Type-C male connector at one end. At the other end, we have a female Thunderbolt 2 port.
One of the important aspects to note is that the Thunderbolt 2 port, despite physically being a mini-DP port, doesn't support mDP or DP monitors. It does, however, support Thunderbolt displays. The adapter can also be used at the top of a daisy chain of legacy Thunderbolt peripherals.
Usage Impressions and Evaluation Setup
Putting the TBT3TBTADAP to use is as simple as plugging in the unit into a Thunderbolt USB-C port of the PC and the legacy Thunderbolt peripheral to the adapter itself. The legacy device gets automatically recognized as a Thunderbolt peripheral on the host PC, and the Thunderbolt software (security / connection options) gets activated. It is imperative that the Thunderbolt firmware and the drivers on the host PC are up-to-date.
The main focus of our evaluation was more on the qualitative aspects, rather than providing performance numbers. Towards this, we tested out the adapter with the following hardware:
- Host PCs
- AnandTech Skylake DAS Testbed (GIGABYTE Z170X-UD5 TH motherboard)
- Intel NUC6i7KYK Skull Canyon NUC
- Legacy Thunderbolt Peripherals
It is not possible to evaluate all legacy Thunderbolt devices, but, we personally tested and can vouch that the adapter works with the above hardware. The choice of legacy Thunderbolt peripherals was driven by the fact that the Rugged Thunderbolt is a bus-powered device, while the 2big Thunderbolt 2 is self-powered (connects to an AC wall outlet). In addition, the above configuration also allowed us to test daisy chaining by first connecting the 2big Thunderbolt 2 to the adapter, and the Rugged Thunderbolt to the second Thunderbolt port on the 2big Thunderbolt 2. These configurations worked without a hitch on both of our host PCs.
The adapter also works with Thunderbolt displays, though we didn't evaluate that aspect ourselves. However, based on various e-tailer consumer reviews, it appears that people have reported mixed results. The root cause seems to be the host system itself. One of the most common resolutions we have seen is a hard power cycle / power on delay after upgrading the Thunderbolt firmware and drivers on the host PC.
Miscellaneous Aspects and Concluding Remarks
The StarTech.com TBT3TBTADAP adapter is an active component. It consumes power from the host system in order to operate. In order to get a quantitative feel of this aspect, we hooked up the adapter to our GIGABYTE host system using the Plugable USBC-TKEY power delivery sniffer. The power consumption was tracked starting with just the adapter connected to the host PC. After some time, the LaCie Rugged Thunderbolt SSD was connected to the adapter and the CrystalDiskMark 5.0.2 benchmarks were processed on it, with a 30-second gap between each of the workloads.
We can see that the adapter consumes 0.184 W from the host system even when there is no legacy peripheral connected to it. Once a peripheral is connected, the major component of the power draw from the Thunderbolt 3 host port is dictated by the connected device and the workload being processed on it.
Incidentally, we also confirmed that the adapter can do TRIM passthrough. This obviously depends on the the capabilities of the storage device being connected via the Thunderbolt link.
Coming to the business end of the review, we can say that the unit fulfills one of the most important requirements for Thunderbolt 3 to succeed - a way to utilize legacy Thunderbolt peripherals with Thunderbolt 3 systems. In our limited testing with a couple of host systems and couple of legacy peripherals, the adapter managed to perform without any hiccups. That said, based upon consumer reviews online, it appears that the experience is heavily dependent on the host system and the peripheral connected to the adapter. Fortunately, StarTech.com's customer service seems to be taking a proactive role in resolving these user complaints. Based on our own issue-free experience, as well as the general feedback on various e-tailer sites, we have no hesitation in recommending the StarTech.com TBT3TBTADAP Thunderbolt 3 to Thunderbolt Adapter. It is a must-have for consumers with legacy Thunderbolt devices that need to be used with modern systems equipped with Thunderbolt 3 Type-C ports.
The StarTech.com TBT3TBTADAP Thunderbolt 3 to Thunderbolt Adapter is currently available for $79 on Amazon, and carries a 2-year warranty.
Post Your CommentPlease log in or sign up to comment.
View All Comments
RaichuPls - Wednesday, August 3, 2016 - linkUhhhhh.........
Was gonna bitch at no GPU reviews, but then I laughed at the name. Does TBT3TBTADAP actually mean anything?
hyno111 - Wednesday, August 3, 2016 - linkObviously ThunderBolT 3 to ThunderBolT ADAPter.
Supacon_Fizzix - Wednesday, August 3, 2016 - linkIt means Thunderbolt 3 to Thunderbolt Adapter. I'd think that's obvious. StarTech products generally have very straightforward product names that make it very easy to search for their stuff and that is one thing I like about that company.
boeush - Thursday, August 4, 2016 - linkWhile this name makes sense in an engineering sort of way, still reading it made my internal monologue suddenly if briefly acquire the ineffable tonality of Porky Pig.
I had to re-read it a few times, just to make sure I wasn't hallucinating. Yep, it definitely brings out my inner Porky. And I didn't even know I HAD an inner Porky.
I have learned something very profound about myself today. Thanks, startech.com!
Flunk - Wednesday, August 3, 2016 - linkThat price seems a bit high for an adapter.
LtGoonRush - Wednesday, August 3, 2016 - linkThat's a typical price for an adapter containing an active transceiver chip when new. Price will decline if they move in volume, but Thunderbolt stuff doesn't typically sell volume.
Kevin G - Wednesday, August 3, 2016 - linkAt $79, pricey if a person invested in simple adapters (FW800, Gigabit ethernet etc.) but worthwhile for some of the professional gear that uses Thunderbolt like Black Magic's UltraStudio video IO box.
danbob999 - Wednesday, August 3, 2016 - linkas soon as the Thunderbolt name is on a product, expect it to be overpriced.
r3loaded - Wednesday, August 3, 2016 - linkWhy does Thunderbolt anything have to be so expensive? Granted, this isn't *too* bad considering it's an active powered transceiver chip, but Thunderbolt docks are at the stupid end of pricing.
Gigaplex - Wednesday, August 3, 2016 - linkNiche and complex.