Micron Announces 1300 Client SATA SSD With 96L TLCby Billy Tallis on February 28, 2019 12:00 PM EST
Micron's line of client SATA SSDs for the OEM market is making the jump to 96-layer 3D TLC NAND flash memory with the new Micron 1300 SSD. This replaces the Micron 1100 SSD, which used Micron's first-generation 32-layer 3D TLC.
The Micron 1100 was very similar to the Crucial MX300 consumer/retail SATA drive, but since then the two product lines have diverged. The Crucial MX series switched over to using Silicon Motion controllers with the MX500, featuring 64L 3D TLC. The Micron 1100 stuck around and occasionally made an impact on the retail market as a cheaper alternative available through grey-market resellers.
The Micron 1300 leapfrogs the Crucial MX series by adopting 96L TLC, but otherwise little has changed from the 1100 series—it's still using Marvell controllers and provides the same feature set including optional TCG Opal encryption support and partial power loss protection.
|Micron 1300 SSD Specifications|
|Capacity||256 GB||512 GB||1 TB
|NAND Flash||Micron 96L 3D TLC|
|Form-Factor, Interface||2.5" or M.2 2280 SATA||2.5" SATA|
|Sequential Read||530 MB/s|
|Sequential Write||520 MB/s|
|Random Read||58k IOPS||90k IOPS|
|Random Write||87k IOPS|
|Write Endurance||180 TB
Since there's hardly any room for performance improvement behind a 6Gbps SATA link, Micron is primarily touting improved pricing and power efficiency for the 1300 SSD, though neither is quantified all that well by their press release. We found Micron's 32L 3D NAND to be consistently one of the slowest 3D flash memories ever shipped, so it's likely that the Micron 1300 with 96L NAND does provide a boost to performance at low queue depths even if the peak performance is largely unchanged.
The Micron 1300 does not expand the range of available capacities: up to 2TB for 2.5" drives, and up to 1TB for M.2 SATA drives. Micron's datacenter SATA drives have hit 8TB using the same Marvell controllers, but the mainstream client SSD market doesn't have much demand for 4TB or 8TB drives yet.
The write endurance ratings at the higher capacities are rather disappointing, with both 1TB and 2TB models rated for the same 400TB total endurance. Micron is reportedly already selling 96L TLC in the recently introduced 960GB Crucial BX500, so they shouldn't need to use the 1300 to unload low-grade 96L NAND. Instead, it seems the low endurance ratings are simply due to a lack of market pressure, highlighting one of the ways that the OEM market differs from the consumer retail SSD market.
Post Your CommentPlease log in or sign up to comment.
View All Comments
Jhlot - Thursday, February 28, 2019 - linkWhy is the 2TB endurance rated for no more than the 1TB, 200 full drive writes is.....sad.
FelixM - Sunday, April 7, 2019 - linkWhere did you get info about 5 years warranty? The 1300 pages/specs on Micron site do not explicitly specify warranty for this SSD, and all "general" pages on their site specify 3 years warranty for consumer SSDs, and 1300 is a consumer series.
Luckz - Saturday, January 18, 2020 - linkIsn't it more even a OEM series without warranty from the manufacturer?
jeremygordon8 - Monday, April 8, 2019 - linkI would want my child's teacher to be a specialist in his/her chosen field of teaching and not just someone who thinks it would be 'cool' to teach in an urban school for a few years to pad the resume, which is exactly what is happening today.
LesleyGlover - Thursday, May 28, 2020 - linkMany students need help with essay writing. But it's really difficult to trust some online service. Take a look at this https://advanced-writer.com/reviews">advanced writer reviews so you'll know everything about this service and writers.